(808) 220-2986 info@tc-11.com

All Terrain Vehicles

 

All Terrain vehicles actually thrive on harsh environments.  As sporting as they are however, they are not immune to conditions in which rust and corrosion can easily take a toll on them.  TC-11 will go a long way in protecting the undercarriage surfaces, drive train and suspension among others.  Topside, there are numerous areas such as hinges, floorboards and other metal surfaces exposed to the elements.  Simply follow the TC-11 general application instructions to protect your vehicle

 

Environments where all-terrain vehicles operate are tough on their mechanisms .  TC-11 is up to the challenge when used properly. Here are some tips on where to apply TC-11 for the ultimate in protection.

Corrosion control.

  • engines – a wash down and a thin coat of TC-11 on the engine every three months will keep it corrosion free..
  • Valves – a light coat of TC-11 applied every three months will keep valves working smoothly.
  • Fittings – a light coat of TC-11 applied every three months will keep fittings corrosion free.
  • Pulleys – a light coat of TC-11 applied every three months will keep pulleys operating smoothly.
  • Tracks – a light coat of TC-11 applied every three months will keep tracks operating smoothly.
  • Stanchions – TC-11 and 0000 steel wool will remove rust stains and leave a protective film for a month in full sunlight.
  • Steering – a light coat of TC-11 every three months will keep steering mechanisms operating smoothly and corrosion free.
  • Electrical – a light coat of TC-11 applied to connectors every three months will keep the connectors corrosion free.
  • Waterproofing – a light coat if TC-11 applied to electrical connectors every three months will prevent failures when they get wet.
  • Through body fittings – a light coat of TC-11 applied every three months will keep fittings corrosion free.